Pulse Frequency Rate

From the input parameters below choose whether you with to input the linear speed or the part diameter and rotation speed.

If the weld to be made is round/circumferential and you know the approximate linear weld speed desired (in Inches Per Minute - IPM) then input the Linear Weld Speed, and the Part Diameter. The software will then also calculate the part RPM required for the weld.

The arc pulsation rates calculated above represent starting values only. Varying the pulsation rate may result in a more stable arc for a given welding set-up and thus produce more consistent output. Modification of the arc pulsation starting values with experimentation and experience will determine the final weld parameters.